ADT® Authorized Dealer Serving South Fulton & Atlanta Metro Area
Carbon monoxide detector attached to wall of home
January 08, 2024

Where To Place Carbon Monoxide Detectors In Your South Fulton Residence

Residents must safeguard against numerous risks like burglary, flooding, and fire. But what about something that you aren’t able to smell or see? Carbon monoxide is different from other risks as you may never know it’s there. Despite that, using CO detectors can effectively safeguard yourself and your household. Learn more about this potentially lethal gas and where to place carbon monoxide detectors in your South Fulton home.

What Is Carbon Monoxide?

Known as the silent killer due to its lack of color, taste, or odor, carbon monoxide is a commonly found gas caused by incomplete fuel combustion. Any fuel-utilizing appliance like a furnace or fireplace can produce carbon monoxide. While you typically won’t have problems, difficulties can arise when appliances are not regularly serviced or adequately vented. These oversights could cause a proliferation of this dangerous gas in your home. Heating appliances and generators are the most frequent causes for CO poisoning.

When in contact with lower concentrations of CO, you could experience headaches, dizziness, fatigue nausea, or vomiting. Continuous exposure to higher amounts can result in cardiorespiratory failure, coma, and death.

Tips For Where To Place South Fulton Carbon Monoxide Detectors

If you don’t own a carbon monoxide detector in your residence, purchase one today. Preferably, you should have one on every floor, including basements. Here are some tips on where to place carbon monoxide detectors in South Fulton:

  • Put them on every level, especially in areas where you have fuel-burning appliances, including water heaters, furnaces, gas dryers, and fireplaces.
  • You should always use one no more than 10 feet away from bedroom areas. If you only have one CO detector, this is the place for it.
  • Place them about 10 to 20 feet from sources of CO.
  • Avoid installing them right next to or above fuel-consuming appliances, as a little carbon monoxide may be released when they kick on and prompt a false alarm.
  • Fasten them to walls approximately five feet off the ground so they can measure air where inhabitants are breathing it.
  • Avoid installing them near doors or windows and in dead-air areas.
  • Install one in spaces above attached garages.

Test your CO detectors routinely and maintain them per manufacturer instructions. You will generally have to replace units within five or six years. You should also ensure any fuel-consuming appliances are in in optimal working order and have adequate ventilation.