Categories

System malfunctions and false alarms can be exasperating, and more importantly, might prevent your home security system from working the way it should. Thankfully, most problems, from false alarms to dead batteries, are easy to remedy. Take a look at our recommendations for troubleshooting your home alarm system in South Fulton. We’ll help you keep your family members safe and your system running the way it should.

Test Your Home Security System In South Fulton

One of the best ways to troubleshoot your property’s security is to test it! The latest systems permit you to place them in test mode to prevent you from triggering an emergency call. After switching to test mode, do the following:

• Arm your system as you typically would when leaving.
• Open a door or window that uses a contact sensor, or test other equipment. Shut the window or door once you’re finished so it doesn’t trip the alarm when you reactivate the system.
• Let the alarm go off for 60 seconds to ensure communications with the security provider and to create an entry in the alarm activity log.
• Proceed to test equipment as you wish
• Inspect the systems’s activity log to validate proper function.

Don’t worry, monitoring professionals can tell that your alarm system is being tested. Just make sure to turn test mode off when done. It’s smart to test once a month or anytime you make changes to your home’s internet or phone service.

Inspect The Placement And Condition Of Motion Detectors

Although an crucial aspect of your alarm system, motion detectors are notorious for false alarms. Prevent them with a few straightforward troubleshooting steps.

• Conduct a visual inspection. Are there objects that could move within the sensor’s detection zone, like a window treatment blown in a breeze?
• Is the sensor clean? Cobwebs, dirt, and grime can cause malfunctions. Ensure the device is clean.
• Does the motion detector come with pet immunity you can activate? Some can be set to ignore pets up to 100 pounds.
• When was the battery last replaced? A nearly depleted battery can affect performance or lead to false alarms.
• Is the sensor aimed toward a source of heat? Too much heat from a fireplace, direct sun, or something else can set off an alarm.

Keep Batteries Ready And Watch Out For Low Battery Notifications

One helpful benefit of modern home security systems is that they’ll alert you when batteries are dying. If your system is equipped with a control panel or smartphone app, you’ll often discover alerts there. Depending on your system, you might notice an occasional beep when batteries are running out. 

Motion sensors, contact sensors, smoke detectors, and other wireless components have batteries that will have to be replaced every year or two. It’s wise to keep batteries around and set a replacement schedule. Top systems also have a backup battery for the main control panel. This battery keeps your system running if you lose power and should recharge once power is restored. If it doesn’t recharge, you should replace it.

Troubleshooting Is Effortless With ADT Home Security In South Fulton 

As the leading name in home security, ADT designs systems that provide unrivaled protection and functionality. Accessing test mode is straightforward through MyADT.com or the ADT+ app, and you’ll always get notifications when a battery is nearing depletion. Contact Secure24 Alarm Systems, an authorized ADT dealer, to find out more and design a system perfectly suited to your South Fulton home. Dial (731) 202-7028 or submit our form today!